PYNQ™-ZU

Zynq UltraScale+ XCZU5EG-1SFVC784 MPSoC

• Quad core ARM Cortex-A53, Dual R5 processors
• DDR4 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
• High-bandwidth peripheral controllers: 1G Ethernet, 2x USB 3.0, DisplayPort
• Low-bandwidth peripheral controllers: 2x each SPI, UART, I2C
• Programmable from JTAG and MicroSD card
• 256,200 system logic cells, 234,240 Flip-Flops and 117,120 LUTs
• 5.1 Mb total block RAM, 18.0 Mb ultra RAM
• 1,248 DSP slices
• On-chip analog-to-digital converter (XADC)

Memory

• 4GB DDR4 2400R (64 bits wide)
• MicroSD slot

USB and JTAG

• Micro USB-JTAG programming circuitry
• Micro USB-UART bridge
• USB 3.0 OTG PHY (supports host only)
• USB Composite 3.0

Audio and Video

• HDMI 2.0 sink port (input)
• HDMI 2.0 source port (output)
• Mini Display Port
• I2S interface with 24bit DAC with 3.5mm TRRS jack
• Line-in with 3.5mm jack

Switches, Push-buttons and LEDs

• PL
  4 push-buttons
  4 slide switches
  4 LEDs
  2 RGB LEDs
• PS
  2 LEDs
  1 push-button

Expansion Connectors

• 2 standard Pmod ports and 1 TPM Pmod
• CSI
• FMC LPC
• 2 SYZYGY standard ports

Raspberry Pi connector

• 28 Total FPGA I/O pins